WATCH VIDEO - WARRIOR X 3
The Warrior X 3 is an upgraded version of the Warrior X Pro and is packed with great tactical features. Its max output is increased by 400 lumens to 2,500 lumens, 19% higher than the Warrior X Pro and its max beam distance reaches 560 meters. This long-range torch is truly a powerful compact thrower.
● Tactical Tail
Like its predecessor, the 2500 lumen torch has a dual-stage tactical tail switch to access high/low output either momentarily or constantly. The tail switch will access constant low with a quick half-press, or momentary low with a half-press and hold. Constant high is accessed with a quick deep press or momentary high is activated with a deep press and hold. Single press the button again to turn the torch off. Easy to operate.
Another thing worth mentioning is that its tail switch accepts an optional lockable and supports Olight's signature magnetic charging which makes the charging more convenient and faster. It also supports an optional dual-button magnetic remote switch for maximizing its efficiency as a WML. This is a very important point for those with tactical needs, and it is also an essential function for a tactical torch.
● Three Zirconium Beads
The Warrior X 3 has been upgraded with 3 zirconium beads embedded in the strike bezel which is great to break windows in an emergency or use as a defense tool. Both light and zirconium beads can save you from the darkness. For their material is very hard, there is no need to worry about damaging them with force. Instead, be careful when you use it.
● Tactical Ring
Warrior x 3 is equipped with a Warrior Ring which even has a striking tip on the edge, making it not only easier to grab but also more tactical features. And there is a silicone tactical grip ring as well, which provides better control of the torch during stressful moments. You can remove the aluminum warrior ring and put the included silicone tactical grip ring in its place. Only need to unscrew the tail cap, lift off the warrior ring, then simply slide the silicone grip over the end with the wider side first, and once fully pushed down screw the tail cap back on.
● Rechargeable Torch
Powered by a customized 5000mAh 21700 Li-ion battery, it can be recharged via the MCC3 charging cable and runs for up to 8 hours. The cable magnetically snaps onto the tail cap and shows red when charging or green when it’s fully charged. When the power is low, the internal motor silently vibrates to remind you to charge the battery without requiring a glance.
The low power vibration feature will notify you at the following power levels:
Power ≤20% - vibrate once every 5 minutes
Power ≤10% - vibrate once per minute
Power ≤5% - vibrate once every 10 seconds
Aerospace-grade aluminum alloy body with hardcoat anodizing (Type III), non-slip knurling, and 3mm tempered glass lens. It is resistant to 2-meter drops and rated IPX8 waterproof. For easy carrying, Warrior X 3 also comes with a sturdy nylon holster with sewn belt loops, a D-ring, and a strap using popular studs. What makes this holster special is its strong magnetic closure that keeps the flashlight securely in the bag, but also easy to access when needed.
In a word, with all-around tactical features, the Warrior X 3 delivers expert-level tactical performance. At the same time, it is also suitable for many people's daily outings, and it can also play a very important role in some outdoor activities or adventures.
2500 lumens; 2 minutes, 30 seconds run-time; 560 m beam range
1000 lumens; 2 hours, 9 minutes run-time
300 lumens; 33 minutes run-time
300 lumens; 8 hours run-time; 195 m beam range
*The high setting after 2.5 minutes run-time will decrease to 1000 lumens to protect the LED from overheating, and will drop again after 1 hour, 40 minutes.
18 Feb, 2023
28 Dec, 2022
26 Dec, 2022
Colour： Desert Tan
02 Dec, 2022
30 Nov, 2022
28 Nov, 2022
Colour： Desert Tan
27 Nov, 2022
Colour： Desert Tan
26 Nov, 2022
23 Nov, 2022
02 Nov, 2022
|Warrior X 3 User Manual.pdf||1265KB|